SCARA Robot Basics: How Its Four Axes Work
SCARA robots are four-axis industrial robots. They are well suited to fast assembly and pick-and-place in confined spaces. The acronym stands for Selective Compliance Assembly Robot Arm. The arm is compliant in the horizontal plane and remains rigid vertically. This combination makes it a specialist for joining processes involving small parts. This article breaks down its design, axes and work envelope. It compares SCARA robots with 6-axis, delta and collaborative robots and names suitable manufacturers.
Reading time approx. 10 minutes
What is a SCARA robot and what does the acronym stand for?
SCARA robots are industrial robots with 4 axes. The name stands for Selective Compliance Assembly Robot Arm. This describes an assembly arm with selective compliance. It moves quickly in the horizontal plane. Vertically, it moves down into a workpiece from above.
This type of robot originated with Hiroshi Makino at the University of Yamanashi. He developed the concept in 1978. The first commercial SCARA robot came to market in 1981. It was designed for small-parts assembly in Japanese electronics manufacturing. The SCARA robot is also known as a horizontal articulated robot. This is because its two main joints swivel like an elbow in a single plane.
The second common expansion is Selective Compliance Articulated Robot Arm. Both variants describe the same principle. The arm remains compliant where tolerance compensation is helpful. It remains rigid where force and accuracy matter. This makes SCARA robots some of the best-selling industrial robots in electronics and small-parts assembly.
Design and the four axes of a SCARA robot
SCARA robots have 3 rotary axes and 1 linear axis. Together, these provide 4 degrees of freedom (DOF). Two rotary joints move the arm in the horizontal plane. A linear axis raises and lowers the tool. A fourth axis rotates it about the vertical axis.
The four axes in detail:
| Axis | Type | Movement | Function |
|---|---|---|---|
| Axis 1 | rotary | Swiveling of the first arm segment (shoulder) | Coarse positioning in X-Y |
| Axis 2 | rotary | Swiveling of the second arm segment (elbow) | Fine positioning in X-Y |
| Axis 3 | linear | Upward and downward movement (Z) | Vertical insertion and joining |
| Axis 4 | rotary | Rotation of the tool shaft (theta) | Aligning the tool center point (TCP) |
The two rotary joints are mounted on parallel, vertical axes of rotation. This keeps the tool shaft vertical at all times while the arm moves to the target point. Axis 3 and axis 4 are usually combined in a ball screw spline shaft. The same shaft raises the tool and rotates it. The tool center point (TCP) is the working point on the tool. It therefore follows a clearly defined path at a fixed height. This is precisely why SCARA robots achieve short cycle times. The heavy drives are located in the base and joints. Only a lightweight shaft performs the vertical movement.
The kidney-shaped work envelope of a SCARA robot
SCARA robots have a kidney-shaped work envelope. The vertical stroke is short, at 100 to 400 millimeters. Viewed from above, the reach of the two arm segments forms a curved, kidney-like area. The short vertical Z movement turns this into a shallow cylindrical section around the base.
This shape results from the kinematics. The arm has difficulty reaching points directly in front of the base. The two segments can hardly be angled effectively there. The sum of the two arm lengths limits the outward reach. Between these limits, the usable area forms a curved band. The vertical stroke of the Z axis is deliberately kept short. It depends on the size of the robot.
SCARA robots therefore work in a plane rather than in three-dimensional space. If you arrange the loading station, conveyor and deposit area at the same height, you can make optimum use of the work envelope. This is precisely why SCARA robots are almost always mounted above the work surface. They reach down from above. The kidney-shaped work envelope keeps layouts compact and on a single plane.
Selective compliance: compliant in X and Y, rigid in Z
Selective compliance means directional compliance in exactly 2 directions. A SCARA robot yields deliberately in the horizontal plane (X and Y). It remains stiff in the vertical direction (Z). This directional dependence gave this type of robot its name. It is its most important functional advantage.
The benefits become clear during joining. A SCARA robot inserts a pin into a hole or a component into a receptacle. The horizontal compliance compensates for small positional errors. The part slides over the chamfer into the target position instead of jamming. Along the Z axis, the rigid arm presses downward with full force without deflecting sideways. This characteristic makes SCARA robots precise joining tools for plug-in connections, screwdriving and press fits.
A 6-axis robot must control the same tolerance compensation using sensors and software. The SCARA robot provides it mechanically, without additional force control. Selective compliance is therefore not a marketing term. It is a property built into the design: compliant perpendicular to the joining direction and rigid along it.
SCARA robots compared with 6-axis, delta and collaborative robots
SCARA robots, 6-axis robots, delta robots and cobots differ in the number of axes, work envelope and strengths. SCARA is the specialist for fast joining in a single plane. The 6-axis robot is the all-purpose robot for any orientation. The delta robot picks lightweight parts at high speed. The cobot works as a partner directly alongside people.
| Criterion | SCARA | 6-axis robot | Delta robot | Cobot |
|---|---|---|---|---|
| Axes | 4 | 6 | 3 to 4 | 6 to 7 |
| Work envelope | kidney-shaped, flat | spherical, three-dimensional | dome-shaped, flat | spherical, three-dimensional |
| Payload (typical) | 1 to 20 kg | 3 to 1,000+ kg | 0.1 to 8 kg | 3 to 35 kg |
| Repeatability | ±0.01 to ±0.02 mm | ±0.02 to ±0.1 mm | ±0.1 mm | ±0.02 to ±0.1 mm |
| Strength | vertical joining, speed | free orientation | high speed | collaboration |
| Weakness | limited vertical stroke | slower, more expensive | lightweight parts only | lower speed |
SCARA robots beat 6-axis robots on pure throughput in a single plane. However, they lose out as soon as a part has to be processed from multiple angles or tilted. Compared with the delta robot, SCARA wins on higher payload and actual joining. Compared with the cobot, it wins on speed and repeatability. Once you have chosen a robot type, the next question is how to set up the cell. The article How to find the right system integrator explains how to find the right partner for this. If you want background information on collaborative robots, see the overview What is a cobot? Advantages, disadvantages and costs.
Advantages and limitations of SCARA robots
SCARA robots offer high speed, repeatability of ±0.01 to ±0.02 millimeters and a simple, inexpensive design. Their limitation is the flat work envelope. They are the wrong choice for spatially complex tasks involving many different approach angles.
The strengths at a glance:
- Speed: short cycle times because only a lightweight shaft performs the vertical movement and the heavy drives are located in the base.
- Accuracy: repeatability of 10 to 20 micrometers, ideal for small parts.
- Costs: the four-axis design is simpler than a 6-axis articulated design and therefore cheaper to purchase and maintain.
- Rigidity: high force in Z for reliable joining processes.
- Footprint: compact base, easy to mount above the work surface.
The limitations are equally clear. SCARA robots have only a short vertical stroke and no free tool orientation because the tool shaft always remains vertical. Angled approach directions, tilting components or large height differences require a 6-axis robot or a cobot. SCARA robots are also not designed for direct collaboration with people without a separating safeguard. SCARA robots are specialists, not all-purpose robots. That is exactly where their value lies.
Typical applications from assembly to dispensing
SCARA robots automate four core processes: assembly, pick-and-place, packaging and dispensing. In every case, the focus is on fast, precise and repeatable movements with small parts at a defined height.
- Assembly: SCARA robots drive screws, insert pins, plug in connectors and assemble small subassemblies. Their horizontal compliance ensures clean joining without jamming.
- Pick-and-place: SCARA robots pick parts from a conveyor and place them in nests, trays or on another transport system. The article on the different types of end effectors presents suitable tools.
- Packaging: SCARA robots place products in cartons or blister packs and can be combined with sensors for shape and orientation detection.
- Dispensing: SCARA robots apply adhesives, sealants or liquids in exact quantities and along precise paths, often in the pharmaceutical and chemical industries.
The target industries extend beyond electronics. SCARA robots work in medical technology and laboratories, food and beverage production, pharmaceuticals and plastics processing. Wherever many identical parts need to be handled quickly and accurately, SCARA robots make the most of their strengths. If you are looking for the right gripper, the article on what a good robot gripper costs provides guidance.
SCARA robot manufacturers compared
SCARA robots come predominantly from Japanese and European manufacturers. Eight suppliers shape the market: DENSO, OMRON, FANUC, Epson, Yamaha, Stäubli, ABB and Mitsubishi Electric. The product series differ primarily in reach, payload and cycle time.
| Manufacturer | Country of origin | Example series |
|---|---|---|
| DENSO | Japan | HS and HSR series |
| OMRON | Japan (Adept) | i4 and eCobra series |
| FANUC | Japan | SR series |
| Epson | Japan | LS and T series |
| Yamaha | Japan | YK series |
| Stäubli | Switzerland | TS2 series |
| ABB | Switzerland/Sweden | IRB 910SC |
| Mitsubishi Electric | Japan | RH series |
When making a selection, the brand name matters less than the hard specifications. The important factors are reach, maximum payload at the TCP, required repeatability and standard cycle time. A typical SCARA cycle moves 25 millimeters up, 300 millimeters horizontally, 25 millimeters down and back. For modern models, this takes 0.3 to 0.5 seconds. SCARA models from Epson and Dobot are listed with visible prices in the industrial robot range on the Unchained Robotics marketplace.
When a SCARA robot pays off and when a cobot is the better choice
SCARA robots are worthwhile for high throughput, small parts and joining processes in a single plane. A cobot is the better choice when direct collaboration with people, flexible approach angles or frequent changeovers are the priority.
The decision follows a clear logic. If the pick-up, processing and placement positions are at the same height, a SCARA robot is usually the faster and cheaper solution. This applies when the cell operates behind a safety barrier. If the robot has to tilt components, join from multiple angles or work directly alongside people, the cobot makes the most of its flexibility. This also applies when it frequently takes on new tasks.
SCARA robots and cobots are not mutually exclusive. They meet different requirements. If you want to maximize the throughput of an assembly line, choose a SCARA robot. If you need an adaptable, collaborative cell, take a look at collaborative robots in the cobot range. The article Bin picking and two possible solutions also explains the basics of high-speed feeding.
Frequently asked questions
What does the acronym SCARA stand for?
SCARA stands for Selective Compliance Assembly Robot Arm, and occasionally Selective Compliance Articulated Robot Arm. Both variants describe the same core principle. It is an assembly arm that yields selectively in the horizontal plane and remains rigid vertically. It is also known as a horizontal articulated robot.
How many axes does a SCARA robot have?
A SCARA robot has four axes, in other words four degrees of freedom. Three of these are rotary (two rotary joints for the horizontal plane plus tool rotation), and one is linear for vertical up and down movement. The two rotary joints are mounted on parallel vertical axes. This keeps the tool shaft vertical at all times.
What is the difference between a SCARA robot and a 6-axis robot?
A SCARA robot has four axes and works across a flat area in a single plane. A 6-axis robot has six axes and can reach any position from almost any angle. SCARA is faster and cheaper for joining processes at a single height. The 6-axis robot is more flexible for spatially complex tasks and components that need to be tilted.
What does a SCARA robot's work envelope look like?
A SCARA robot's work envelope is kidney-shaped. Viewed from above, the reach of both arm segments creates a curved area around the base. The short vertical stroke of the Z axis (typically 100 to 400 millimeters) turns this into a shallow, curved working area.
What payload and repeatability do SCARA robots achieve?
SCARA robots typically carry between 1 and 20 kilograms. Common models are rated at 3 to 6 kilograms. Repeatability reaches ±0.01 to ±0.02 millimeters, or 10 to 20 micrometers. This makes them suitable for the precise handling of small components in electronics and precision assembly.
Which manufacturers make SCARA robots?
Manufacturers of SCARA robots include DENSO, OMRON, FANUC, Epson, Yamaha and Stäubli, as well as ABB and Mitsubishi Electric. The product series differ in reach, payload and cycle time. When selecting a model, the required reach, payload at the TCP and repeatability matter more than the brand.
Where are SCARA robots typically used?
SCARA robots perform assembly, pick-and-place, packaging and dispensing. Target industries include electronics, pharmaceuticals and chemicals, medical technology and laboratories, and food and beverage production. In all of these settings, the focus is on fast, repeatable movements with small parts.
When is a cobot a better choice than a SCARA robot?
A cobot is the better choice in three cases. First, when a robot needs to work directly alongside people, with safety provided solely by force limiting rather than a fence. Second, when flexible approach angles or tilting components are required. Third, when the cell frequently undergoes changeovers for new tasks. For maximum throughput in joining processes in a single plane, the SCARA robot remains superior.